Polycom ReadiManagerSE200 Operator's Manual page 10

Polycom ReadiManager SE200 Operator's Guide
1–2
To set up your computer to use ReadiManager
1 Install the .NET framework. ReadiManager provides a link to a Microsoft
Web site from which you can obtain this software. After it has been
installed, close Internet Explorer and reopen it.
2 Install the third-party .NET control that contains the Polycom plugin
DLL, and then install the plugin DLL.
3 Enable security for .NET components. To do so, run an ActiveX control or
a Security Enabler utility. For details, see the Release Notes, available at
http://www.polycom.com/resource_center.
To set security settings in Internet Explorer
1 From the Tools menu, choose Internet Options.
2 Click the Security tab.
3 Make sure the Internet is selected as the Web content zone.
4 Click Custom Level to open the Security Settings dialog box.
Figure 1-1 Security Settings Dialog Box
5 In the .NET Framework-reliant components section, set the following to
Enable:
— Run components not signed with Authenticate
— Run components signed with Authenticate