Adding A Guest (External Participant) - Polycom ReadiManagerSE200 Operator's Manual

Figure 4-4
7 In the Dial Settings dialog box, make any desired changes to settings and
click OK. For details, see Table 4-3.
8 Click Update in the Add Participants dialog box.
9 Click Close.
Table 4-3
Field
Name
Dial Type
Device
Dial Options
Speed
Set as Host
Site

Adding a Guest (External Participant)

You can add a guest (external participant) to an active conference. A guest is a
user or room that is associated with a device that is not managed by
ReadiManager.
Note: If guests need assistance, advise them to contact you by telephone.
Dial Settings Dialog Box
Fields in Dial Settings Dialog Box
Description
The name of the local resource.
Specifies how this video endpoint is accessed: through IP or ISDN.
The name of the device.
If you select Dial-In, you must communicate the dial-in number and
pass code to the participant you have added.
Note: If MMPC or IVR is not enabled on the MGC, you must look up
this information in MGC Manager.
The connection speed the device uses for the conference.
Select this check box to set this resource as the host site for the
conference.
Managing Active Conferences
4–7