Presetw -- Save A Preset; Presetx -- Execute A Preset - Polycom Vortex EF2201 Command List

has been previously defined via the
condition of ERROR#070 will be returned. If one or more of the commands in the preset generated
errors, then an error condition of ERROR#072 will be returned.
When the PRESETQ command executes, status messages for all of the commands in the preset will not
be generated. The PRESETQ command is provided so that a control system can execute a preset and
not generated heavy data traffic from the resulting status messages. Of course, this assumes that the
control system is not interested in any of the acknowledgements. The
to execute the preset without suppressing the status messages.
Example Description
Execute preset number 18 without generating any status
T01PRESETQ18
messages.

8.98. PRESETW -- Save a Preset

This command writes the current settings of the device into the user preset with the specified number.
Since the factory presets (0 - 15) are read-only, an ERROR#071 will be generated if they are specified
in the PRESETW command.
Once a preset it saved, it can be recalled via the
also be set to be executed automatically at power-up via the
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example
T01PRESETW18

8.99. PRESETX -- Execute a Preset

This command executes the preset corresponding to the specified number, which must be between 0
and 47. The preset must either be a pre-defined factory preset (0 - 15) or a user preset (16 - 47) that
has been previously defined via the
condition of ERROR#070 will be returned. If one or more of the commands in the preset generated
errors, then an error condition of ERROR#072 will be returned.
When the PRESETX command executes, status messages for all of the commands in the preset will be
generated (unless acknowledgement mode
using the command, which is exactly the same as the PRESETX command except that status
PRESETQ
messages are suppressed.
Example Description
PRESETW
Description
Save the current device settings as preset 18.
PRESETW
command. If the specified preset is empty, then an error
and
PRESETX PRESETQ
PRESETP
command. If the specified preset is empty, then an error
is turned off). The status messages can be suppressed by
Status Message
command can be used
PRESETX
Status Message
T01PRESETQ18
commands. The preset can
command.
Status Message
T01PRESETW18