Command Reference; Aa -- Enable Or Disable Auto Answer Mode; Ackmod -- Enable Or Disable Acknowledgment Mode - Polycom Vortex EF2201 Command List

Preset
SGGAIN
Preset
SGMUTE
Preset
SGTYPE
-
SOUNDL
-
SOUNDP
Preset
SSDELAY
Preset
SSEN
Preset
SSSTART
Preset
SSTEXT
-
SWRESET
-
SWVER
Preset
TONEE
Preset
TONER

8. Command Reference

8.1. AA -- Enable or Disable Auto Answer Mode

This command sets or queries the status of the auto answer feature.
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
Enable auto answer mode. T01AA1
T01AA1
Disable auto answer mode. T01AA0
T01AA0
Toggle auto answer mode.
T01AA2
Query auto answer mode.
T01AA?

8.2. ACKMOD -- Enable or Disable Acknowledgment Mode

This command controls whether or not status messages are sent. See
on status messages. This parameter is enabled by default, and it is rarely turned off by the host
controller.
Set Gain of Signal Generator
Mute Signal Generator
Set Type of Signal Produced by Signal Generator
Play Sound Locally
Play Sound to Phone
Set Delay Between Screen Saver Screens
Enable or Disable Screen Saver
Set Idle Time Required for Screen Saver to Start
Set Text to be Displayed by Screen Saver
Perform Soft Reset of System
Query Software Version
Enable or Disable Entry and Exit Tones
Enable or Disable Ring Tones
Section 6.1
Status Message
T01AAx, where x is 0 or 1 depending on the current state of
auto answer mode.
T01AAx, where x is 0 or 1 depending on the current state of
auto answer mode.
for more information on this type of command.
Section 5 for more information