Polycom Vortex EF2201 Command List page 3

8.17. DELAYO -- Set Output Delay
8.18. DELAYOE -- Enable Output Delay
8.19. DIAL -- Send DTMF Digits to Phone Interface
8.20. DSPAUTO -- Enable Automatic DSPLOAD Status Messages
8.21. DSPLOAD -- Query Percentage of Variable DSP Resources Used
8.22. ERROR -- Enable or Disable Error Messages
8.23. FADERI -- Set Input Gain Fader
8.24. FLASH -- Execute Hook Flash
8.25. FLOW -- Set Flow Control Mode for RS-232 Port
8.26. FPLOCK -- Lock/Unlock Front Panel
8.27. FPPSWD -- Change Front Panel Password
8.28. GAINA -- Set Phone Input Gain
8.29. GAIND -- Set Gain of Incoming DTMF Tones
8.30. GAINDIT -- Set Gain of Incoming DTMF Tones
8.31. GAINDT -- Set Dial Tone Gain
8.32. GAINI -- Set Input Gain
8.33. GAINO -- Set Output Gain
8.34. GAINP -- Set Phone Output Gain
8.35. GAINSIT -- Set From Phone User Tone Gain
8.36. GAINSOT -- Set To Phone User Tone Gain
8.37. GMUTEO -- Mute All Outputs
8.38. ID -- Set Device ID
8.39. LABEL -- Set or Query one of the Device Labels
8.40. LEC -- Enable or Disable LEC
8.41. LECMODE -- Set Amount of Double Talk Suppression used in the LEC.
8.42. LI -- Query State of Logic Inputs
8.43. LIA -- Assign Action for when Logic Input is Activated
8.44. LID -- Assign Action for when Logic Input is Deactivated
8.45. LIH -- Assign Action for when Logic Input is Held
8.46. LIEN -- Enable Automatic Logic Input Status Messages
8.47. LIG -- Configure Logic Input Pins Into a Group
8.48. LIK -- Delete One or All Logic Input Pin Commands
8.49. LIM -- Mask Logic Input Pins
8.50. LIN -- Assign Command to Logic Input Group
8.51. LIP -- Set Polarity for Logic Inputs
8.52. LO -- Query or Set Status of Logic Output Pins
8.53. LOA -- Define Behavior for Logic Output Activated State
8.54. LOD -- Define Behavior for Logic Output Deactivated Status
8.55. LOEN -- Enable Automatic Logic Output Status Messages
8.56. LOK -- Delete One or All Logic Output Pin Commands
8.57. LOM -- Mask Logic Output Pins
8.58. LOP -- Set Polarity for Logic Outputs
8.59. MACROA -- Add Command to Current Macro
8.60. MACROK -- Delete One or All Macros
8.61. MACROL -- List All Commmands in a Macro
8.62. MACROQ -- Execute Macro Quietly