Table Of Contents - Polycom Vortex EF2201 Command List

Vortex EF2201 Programming Guide

Table of Contents

1. Introduction
2. RS-232 Hardware
3. Programming Tips
3.1. Initialization
3.2. Wildcard Characters
3.3. Using Acknowledgements
3.4. Macros and Presets
4. Command Structure
4.1. Device Type
4.2. Device ID
4.3. Command Name
4.4. Command Data
4.5. Command Terminator
4.6. Examples
5. Status Messages
6. Command Types
6.1. Boolean Commands
6.2. Integer Commands
6.3. Channel Commands
6.4. Matrix Commands
6.5. Miscellaneous Commands
7. Command List
8. Command Reference
8.1. AA -- Enable or Disable Auto Answer Mode
8.2. ACKMOD -- Enable or Disable Acknowledgment Mode
8.3. AGC -- Enable or Disable Mic/Line Input Automatic Gain Control
8.4. AGCMAX -- Set Maximum Allowed Mic/Line Input AGC Gain
8.5. AGCMIN -- Set Minimum Allowed Mic/Line Input AGC Gain
8.6. AGCRATE -- Set Ramp Rate of Mic/Line Input AGC
8.7. AHCP -- Enable or Disable Call Progress Based Auto Hangup
8.8. AHLD -- Enable or Disable Loop Drop Based Auto Hangup
8.9. AMNOMAT -- Select NOM Attenuation on Each Output
8.10. BAUD -- Set Baud Rate for RS-232 Port
8.11. BLAUTO -- Enable Automatic BLDATA Messages
8.12. BLDATA -- Request Level Information
8.13. BLINFO -- Select Information to be Reported in BLDATA
8.14. BROAD2 -- Broadcast Arbitrary Command Strings to RS-232 Port
8.15. BROADA -- Broadcast Commands to Other Connected Devices
8.16. COUNTRY -- Specify Country Definitions for Phone Interface