Nvpswd -- Change Non-Volatile Memory Password; Peqia -- Set All Parameters For Specified Parametric Eq Input Stage - Polycom Vortex EF2201 Command List

T01NVLOCK0,yumyum
T01NVLOCK0,aspi
T01NVLOCK?

8.77. NVPSWD -- Change Non-Volatile Memory Password

This command sets or queries the non-volatile memory password. This password is used in conjunction
with the command. The non-volatile memory must be unlocked ('NVLOCK0') in order to use
NVLOCK
this command to set or query the non-volatile memory password. If the non-volatile memory is locked,
then this command will result in 'ERROR#004'. The examples below assume that the non-volatile
memory is unlocked.
Example
T01NVPSWDlemur
T01NVPSWD?
8.78. PEQIA -- Set All Parameters for Specified Parametric
EQ Input Stage
This command sets or queries all of the parameters for the parametric equalizer (EQ) filters on . Each
channel has five bands of parametric EQ that can be independently controlled.
The input parametric EQ filter parameters can be set individually via the PEQIT, PEQIF, PEQIB,
PEQIG, PEQIS, and
simultaneously via the
PEQOS, and commands.
PEQOE
When using this command, you must specify all of the following parameters.
Description Value Range
Channel T
Band 1-5
Attempt to unlock the non-volatile
memory by using an invalid
password.
Unlock the non-volatile memory
by using the correct password.
Query the locked status of the
non-volatile memory.
Description
Set non-volatile memory password to 'lemur'.
Query the current non-volatile memory password.
commands. The output parametric EQ filter parameters can be set
PEQIE
command or individually with the PEQOT, PEQOF, PEQOB, PEQOG,
PEQOA
T01ERROR#005 -- since an invalid
password was given, an error message
was generated. If error messages have
been disabled (via the
then no status message will be generated.
T01NVLOCK0
T01NVLOCKx, where x is 0 or 1
depending on whether the non-volatile
memory is unlocked or locked,
respectively.
Units
N/A
N/A
command),
ERROR
Status Message
T01NVPSWDlemur
T01NVPSWDlemur