Gaino -- Set Output Gain; Gainp -- Set Phone Output Gain - Polycom Vortex EF2201 Command List

respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
Set gain on
input T to 10
T01GAINIT10
dB.
Query the
gain on input
T01GAINIT?
T .
Set gain on
all inputs (T)
T01GAINI*6
to 6 dB.
Query gain
on all inputs
T01GAINI*?
(T).

8.33. GAINO -- Set Output Gain

This command sets or queries the gain (in dB) of the output channels (only T on the EF2201).
This command is a channel integer command. See
this type of command. The minimum and maximum values for this command are -100 and 20,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
T01GAINOT10 Set gain on output channel T to 10 dB. T01GAINOT10
T01GAINOT? Query the gain on output channel T.
Set the gain on all output channels
T01GAINO*6
(only T on the EF2201) to 6 dB.
Query gain settings on all output
T01GAINO*?
channels (only T on the EF2201).

8.34. GAINP -- Set Phone Output Gain

T01GAINIT10
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx,
where x is a number between 0 and 30, depending on the current
setting of the gain on input channel T .
T01GAINI*è
T01GAINI*x, where x is between ä and ÿ, depending on the current
setting of the gain for the input channel.
Section 6.3 and Section 6.2
Status Message
, , T01GAINOTx where x is a number
between -100 and 20, depending on the
current setting of the gain on output channel
T.
T01GAINO*è
T01GAINO*x, where x is between <space>
and ÿ, depending on the current setting of
the gains for each of the output channel T.
for more information on