Inserting The Power Module - Primedic HeartSave AED Operating Manual

4.3.1
18
HeartSave AED / AED-M

Inserting The Power Module

Illustration 13 PRIMEDIC™ HeartSave AED – Inserting the Power Module
The HeartSave is always supplied with a power module.
The method of inserting the power module is the same in case of all the three vari-
ants.
Place the device on its rear side.
Push the (new) power module (2) in the direction of the arrow (1.) into the device
until it fits at the back (3) as shown in the illustration.
Then press the power module in the front in the direction of the arrow (2.) into
the compartment (1) until the release button (4) the tab of the power module are
locked securely.
Push in the power module into the device completely until you hear the 'click' of
the locking and the power module is locked evenly on the outer side of the de-
vice. If the power module falls out when the device is moved, it has not been
locked correctly.
Operating Manual
20439 / 03.04 / 03 / engl.