Table of Contents
Advertisement
Operating Manual
4.8
4.8.1
4.8.2
20439 / 03.04 / 03 / engl.
Configuration Of PRIMEDIC™ HeartSave AED
Configuration Of PRIMEDIC™ HeartSave AED (Without Monitor)
PRIMEDIC™ HeartSave AED is configured by the factory.
Changes to this setting are not possible.
Configuration Of PRIMEDIC™ HeartSave AED-M (With Monitor)
PRIMEDIC™ HeartSave AED-M is configured by the factory.
Certain parameters in the Setup Menu (displayed on the monitor) can be changed.
This configuration is stored and retained until a new change is carried out, whether
the device is off or the power supply is changed.
To activate the Setup Menu, press the Selection and Confirmation button
ing operation.
Use
– the
button (upwards) or
– the
button (downwards)
to navigate in the menu and to increase or to reduce a selected parameter and the
button (to select a parameter and confirm the changed value).
Changing The Configuration – Example
Following parameters can be changed on the two pages of the Setup Menu:
Page 1:
Language German / English / French / Spanish / Portuguese / Italian
Date
DD.MM.YY
Time
hh.mm.ss
Volume
25 %, 50 %, 75 %, 100 %
Contrast
0 – 100
Microphone On-Off
Page 2:
Data Source
Module
Operation Selection "Name"
Storage
activate
Delete
activate
HeartSave AED / AED-M
dur-
23
Advertisement
Table of Contents
