Cleaning, Servicing And Despatching; Cleaning; Servicing - Primedic HeartSave AED Operating Manual

6
6.1
6.2
32
HeartSave AED / AED-M

Cleaning, Servicing And Despatching

Cleaning

Clean the device only when it is switched off and the electrodes have been dis-
connected. For this, first remove the power module from the device or remove
the plug (in case of the optional power pack) from the socket!
Do not use a dripping wet cloth for cleaning. Do not pour
any liquids on the device and / or do not dip it into any liquids!
Clean PRIMEDIC™ HeartSave AED and all accessories such as the Wall Mount
Rack with any commercially available household cleaner.
Use a slightly damp and clean cloth for cleaning.
Use a standard disinfectant solution for disinfecting
(e. g. Gigasept FF)

Servicing

We recommend a regular inspection / servicing of PRIMEDIC™ HeartSave AED and
all accessories irrespective of the frequency of use by the user / service technician at
least once a year.
Check whether the casing, the cable, the SavePads and the accessories are not dam-
aged in any way.
Check List
Check the expiry date
– the SavePads,
– the battery
– AkuPak (optional) and
replace the parts if required!
Check if
– the status display shows 'OK'
– the device can be switched on!
– the device automatically runs the self-test after it has been switched on!
– the compartment of the power supply unit is clean!
– the device is fully equipped!
– the internal battery is older than 10 years
Hereby, pay attention to the following aspects:
– If any parts of the casing and / or the insulations are damaged, then
get them repaired or replaced immediately.
– If any parts of the casing and / or the insulations are damaged, do not
operate the device or switch it off immediately!
repaired immediately from the manufacturer!
Operating Manual
– Get the device
20439 / 03.04 / 03 / engl.