4
4.1
4.2
4.2.1
16
HeartSave AED / AED-M
Preparatory Measures Before (First) Operation
Unpacking
After delivery, check the packing and the device for any damage during transport.
In case you determine any damage to the device, contact your shipper, dealer or
even the technical service of METRAX GmbH immediately. Give your serial num-
ber and describe the damage to the device.
Do not operate the device if any damage is detected. This can be physically dan-
gerous.
Check the accompanying delivery note and make sure that all the equipment has
been delivered.
Dispose off the packaging material in a non-polluting manner.
Inserting / Changing The SaveCard
1 SaveCard release button
Illustration 12
PRIMEDIC™ SaveCard
Inserting the SaveCard
Before switching on the device for the first time, insert the SaveCard in the slot
provided for it. Drücken Sie die SaveCard soweit leicht ein, bis die Taste (1) aus der
Öffnung herausragt.
Put in the power module now.
A file that is loaded automatically after switching on and / or after inserting the
power module is saved on the SaveCard. This file contains the four languages rele-
Operating Manual
2 SaveCard
20439 / 03.04 / 03 / engl.