Table of Contents
Advertisement
Operating Manual
4.2.2
4.3
20439 / 03.04 / 03 / engl.
vant for your use. Then HeartSave begins operation and runs the self-test. After the
file is loaded by HeartSave, SaveCard does not delete it. Create a backup of the file
afterwards. As the file uses about 4 MB of the storage space, we recommend that
you delete the file with the help of a PC to create more space on the SaveCard.
After each use, the data stored on the SaveCard should be archived on external me-
dia as soon as possible. No further data can be stored if there is no space left on the
SaveCard. PRIMEDIC™ HeartSave can be used even if there is no space to store data
and even without the SaveCard.
Changing The SaveCard
To be able to remove / change the SaveCard, the power module must be removed
first!
Push in button (1) completely – thereby a part of the SaveCard(2) is pushed out of
the slot.
Remove the SaveCard from the device completely, transfer the data (if required)
to a PC and insert this card or a new one with the connector side into the device
first.
Press in the card lightly until the button (1) juts out from the opening.
Then put the power module back into the device.
Inserting / Changing the Power Supply Unit (Power Module)
PRIMEDIC™ HeartSave AED can be operated on three different power modules.
- non-rechargeable LiMnO
- rechargeable AkuPak (optional) or
- PowerLine (optional)
Before using PRIMEDIC™ HeartSave AED for the first time, the power module must
be inserted in the compartment provided for it.
Check the power supply after every use. Check whether the battery should be
replaced with a new one or the AkuPak should be charged. If this is not possible,
another charged AkuPak should be available to ensure ready usability!
HeartSave AED / AED-M
battery,
2
17
Advertisement
Table of Contents
