Removing The Power Module From The Device - Primedic HeartSave AED Operating Manual

Operating Manual
4.3.2
20439 / 03.04 / 03 / engl.
If the power module was placed correctly, the device starts automatically. Follow the
acoustic / visual prompts of the device and switch the device off afterwards. Now the
HeartSave is ready to be used.
Watch the Status-display. If the display shows "OK", the device is ready to be
used
Switch the device (if necessary) off by pressing the On/Off button or place the
cover on the device.
Does the display not show "OK", resp. an error message appears on the Monitor,
remove the cause or call your next service partner.
The device switches off itself.

Removing The Power Module From The Device

Illustration 14 PRIMEDIC™ HeartSave AED – Removing the Power Module
HeartSave AED / AED-M
19