Capacity Display - Primedic HeartSave AED Operating Manual

Hide thumbs Also See for HeartSave AED:
Table of Contents

Advertisement

3.3
14
HeartSave AED / AED-M
Displayed Symbol
OK

Capacity Display

The charge level is shown in the display of HeartSave AED-M. The six possible display
levels mean the following:
•••••
> 80% ... 100%
••••
> 60% ... 80%
•••
> 40% ... 60%
••
> 20% ... 40%
> 0% ... 20%
0% (Device continues to function till the battery is over)
The battery and the optional AkuPak are monitored with the help of an electronic
charge balance to ensure the best possible capacity display.
- In addition to this display, all HeartSave devices give a warning before the battery
is completely exhausted.
- If the device is in the standby function, the speaker gives a ten-second tone at an
interval of one minute.
If the device is in use, every minute, there is a voice prompt in the selected language.
Voice Prompt
AkuPak
< Accumulator charge low, please charge >
Battery
< Battery charge low, please change >
The battery symbol in the status display is activated.
Meaning
– Discharged accumu-
lator
cumulator
– Device defect
the dealer / Metrax
– Device ready for
operation
Operating Manual
Measure
– Charge accumulator or
replace with a charged ac-
– Get the device repaired from
– Device can be used
Display in the Monitor
Charge the accumulator
Change battery
20439 / 03.04 / 03 / engl.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Heartsave aed-m

Table of Contents