PRONAR PDK220
TIP
Damaged or worn blades must be changed in pairs in order to maintain balance of
cutting disc.
FIGURE 5.2
Blade types depending on cutting disc rotation direction
(A) - right blades; (B) - left blades
Due to different cutting disc rotation direction, cutter bar (FIGURE 5.2) is equipped with the
right blades (A) and left blades (B). Rotation direction is indicated on the blade.
ATTENTION!
Check the technical condition of blades and then mounting on each occasion after
driving over obstacle e.g. stone, piece of wood, metal etc.
5.4
SECTION 5