Maintenance - PRONAR PDK220 Operator's Manual

SECTION 2
• Do not transport the machine with the cutting assembly set in the working
position.
• During transport the hydraulic cylinder ram valve should be set in the closed
position.
• During transport disconnect PTO shaft from tractor.
• The mower may not be used or transported in conditions of limited visibility.
• Do NOT ride on the machine or transport any materials on it.
• Before using the machine always check its technical condition, especially in terms
of safety. In particular, check the technical condition of the hitch system, the
cutting system and elements connecting hydraulic system.
• Reckless driving and excessive speed may cause accidents.

2.1.5 MAINTENANCE

• During the warranty period, any repairs may only be carried out by Warranty
Service authorised by the manufacturer. It is recommended that necessary
repairs to machine should be undertaken by specialised workshops.
• In the event of any fault or damage whatsoever, do not use the mower until the
fault has been corrected.
• During work use the proper, close-fitting protective clothing, gloves and
appropriate tools. When working on hydraulic systems it is recommended to use
oil resistant gloves and protective goggles.
• Any modification to the machine frees the manufacturer from any responsibility for
damage or detriment to health which may arise as a result.
• Before undertaking any work on the mower disconnect tractor engine and wait
until all rotating parts come to a stop.
• Regularly check the technical condition of the safety devices and correct
tightening of bolt connections.
• Regularly perform service inspections of machine as recommended by the
Manufacturer.
• Do NOT perform service or repair work under raised and unsupported machine.
2.5
PRONAR PDK220