Withdrawal From Use - PRONAR PDK220 Operator's Manual

SECTION 1

1.7 WITHDRAWAL FROM USE

In the event of decision by the user to withdraw the machine from use, comply with the
regulations in force in the given country concerning withdrawal from use and recycling of
machines withdrawn from use.
Before proceeding to dismantle equipment oil shall be completely removed from hydraulic
system, cutting blades and transmission Locations of drain plugs and method for draining oil
are described in section 5.
When spare parts are changed, worn out or damaged parts should be taken to a collection
point for recyclable raw materials. Waste oil and also rubber and plastic elements should be
taken to establishments undertaking the utilisation of such waste.
IMPORTANT!
During dismantling personal protection equipment shall be used i.e. protective clothing,
boots, gloves and protective goggles etc.
Avoid contact of skin with oil. Do not allow used oil to spill.
1.9
PRONAR PDK220