Checking And Replacing Cutting Blades - PRONAR PDK220 Operator's Manual

PRONAR PDK220

5.1 CHECKING AND REPLACING CUTTING BLADES

DANGER
During inspection and replacement of blades, turn off tractor engine and remove the key
from the ignition and disengage PTO shaft. Cutter bar must rest on the ground.
FIGURE 5.1 Replacement of cutting blades
(1)- cutting blade; (2)- blade holder; (3)- blade changing key; (A)- arbor damage example;
(B)- blade damage example; (C)- blade holder damage example
5.2
SECTION 5