Transport - PRONAR PDK220 Operator's Manual

PRONAR PDK220
• repairs carried out by unauthorised persons, improperly carried out repairs,
• making unauthorised alterations to machine design,
the user will lose the right to warranty service.
For detailed Terms & Conditions of Warranty, please refer to the WARRANTY BOOK
attached to each machine.
Modification of the mower without the written consent of the Manufacturer is forbidden. In
particular, do NOT weld, drill holes in, cut or heat the main structural elements of the
machine, which have a direct impact on the machine operation safety.
TIP
Demand that the seller carefully and precisely fills out the Warranty Book and warranty
repair coupons. A missing date of purchase or sale point stamp, may make the user
ineligible for any warranty repair or refund.

1.5 TRANSPORT

The mower is ready for sale completely assembled and does not require packing. Packing is
only required for the machine's technical documentation and any extra fittings.
IMPORTANT!
When transporting independently, the user must carefully read this operator's manual
and observe its recommendations. When being transported on a motor vehicle the
mower must be mounted on the vehicle's platform in accordance with the transport
safety requirements. The driver of the vehicle should take particular care while driving.
This is due to the vehicle's centre of gravity shifting upwards when loaded with the
machine.
Delivery is either by transport on a vehicle or independently. Transport of the mower is
permissible connected to a tractor provided the tractor's driver familiarises himself with the
machine's Operator's Manual and particularly with information concerning safety and
principles of connection and transport of mower on public roads. Do NOT drive the tractor
with mower connected when visibility is limited.
1.6
SECTION 1