Transporting The Machine - PRONAR PDK220 Operator's Manual

PRONAR PDK220
• When connecting the hydraulic lines to the tractor, make sure that the tractor
hydraulic system and mower are not under pressure. If necessary reduce residual
pressure in the system.
• In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections. In
the event of contact of oil with eye, rinse with large quantity of water and in the
event of the occurrence of irritation consult a doctor. In the event of contact of oil
with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
• Use the hydraulic oil recommended by the Manufacturer. Never mix two types of
oil.
• After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil which has lost its properties should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
• Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
• Hydraulic conduits must be changed every 4 years regardless of their technical
condition.
• Repair and replacement of hydraulic system elements should be entrusted to the
appropriately qualified persons.

2.1.4 TRANSPORTING THE MACHINE

• When driving on public roads, comply with the road traffic regulations. in force in
the country, in which the machine is used.
• Do not exceed the permitted speed arising from road conditions and design
limitations. Adjust travel speed to the prevailing road conditions and other
limitations arising from road traffic regulations limits.
• Before beginning travel, the mower must be placed in transport position and
raised using the rear three-point linkage system.
• Do NOT leave machine raised and unsecured while the tractor is parked. When
parked, the machine should be lowered.
2.4
SECTION 2