PRONAR PDK220 Operator's Manual page 45

SECTION 4
FIGURE 4.2 Adjustment of lower pins of the mower's linkage
(1) - lower linkage pins; (2) - setting screw; (3) - counter nut, (A), (B), (C) - setting pins in arm
Lower pins (1) of the mower linkage enable spacing adjustment (FIGURE 4.2). To change
spacing of linkage pins:
• loosen counter nut (1),
• unscrew retaining bolt (2),
• move pin (1) to the right or the left to obtain the required spacing,
• you may also turn pins towards the inside or outside of frame (A), (B), (C) changing
thus the lateral shift of mower in relation to tractor
• Block pin position with setting bolt (2) and counter nut (3)
4.7
PRONAR PDK220