Table of Contents
Advertisement
PRONAR PDK220
4.2 CHECKING TECHNICAL CONDITION
When preparing the mower for normal use, check individual elements according to guidelines
presented in table (4.1).
TABLE 4.1
TECHNICAL INSPECTION SCHEDULE
DESCRIPTION
Condition of safety guards
check if cutter bar and lifting arm
are correctly installed,
Technical condition of cutting
blades
Oil level in intersecting axis gear
Check oil level in cutter bar
Tightening of all main nut and
bolt connections
Lubrication
ATTENTION!
Do NOT use unreliable mower.
SERVICE OPERATION
Check technical condition of safety
guards, if complete and correctly
mounted.
Check if correctly installed
Visually inspect and if necessary
replace according to section „CHECK
AND REPLACE CUTTING BLADES"
For details please refer to section
"CUTTING UNIT MAINTENANCE"
For details please refer to section
"CUTTING UNIT MAINTENANCE"
Torque values should be according to
table (5.5)
Lubricate elements according to table
LUBRICATION
4.4
SECTION 4
FREQUENCY
OF
INSPECTIONS
Daily before
beginning work
every 3
months
According to
table 5.3
Advertisement
Table of Contents
