Cutting Unit - PRONAR PDK220 Operator's Manual

PRONAR PDK220 SECTION 3

3.5 CUTTING UNIT

FIGURE 3.4 Cutting unit
(1) - cutter bar; (2) - intersecting axis gear;(3) - cutting disc; (4) - blade; (5) - blade holder
The cutting unit of mower PDK220 is composed of cutter bar (1) on which is mounted
intersecting axis gear (2). On the cutter bar are mounted five cutting discs (3). On each disc
are seated two rotating cutting blades (4) to right or left depending on the rotation direction of
the disc. Disks are equipped with blade holders (5). Rotation direction of individual discs is
shown on figure FIGURE 3.4.
3.6