SECTION 4
To disassemble the safety device (1) from the lifting arm, remove the cotter pin (3) and pin
(2), lift the safety device (1) and mount it in the linkage. The safety device is dismounted in
order to set the mower to the transport position (A, C FIGURE 4.4).
4.5 SETTING AND MOWING
4.5.1 SETTING THE MOWER IN WORKING POSITION
NOTE
Only set the mower in the working position after the machine is mounted on the tractor.
FIGURE 4.6
Unlocking lifting arm
If in the transport position (FIGURE 4.6), the lifting arm with the cutting unit of the mower is
tilted backwards (safety catch disconnected), raise the lock pin and them turn the lifting arm
by hand to the working position.
4.11
PRONAR PDK220