Table of Contents
Advertisement
PRONAR PDK220
TIP
When loading with lifting equipment, put the mower in its parking position, with the lifting
arm secured with a pin. Support legs should be lowered and secured with pins.
IMPORTANT!
Do NOT secure lifting slings or any types of securing elements to hydraulic cylinders or
slack machine components.
1.6 ENVIRONMENTAL HAZARDS
A hydraulic oil leak constitutes a direct threat to the natural environment owing to its limited
biodegradability. While carrying out maintenance and repair work which involves the risk of
an oil leak, this work should take place on an oil resistant floor or surface. In the event of oil
leaking into the environment, first of all contain the source of the leak, and then collect the
leaked oil using available means. Remaining oil should be collected using sorbents, or by
mixing the oil with sand, sawdust or other absorbent materials. The oil pollution, once
gathered up, should be kept in a sealed, marked, hydrocarbon resistant container, and then
passed on to the appropriate oil waste recycling centre. The container should be kept away
from heat sources, flammable materials and food.
Oil, which has been used up or is unsuitable for further use owing to a loss of its properties
should be stored in its original packaging in the conditions described above.
1.8
SECTION 1
Advertisement
Table of Contents
