Kyocera 3508ci Operation Manual page 475

Setup and Registration (System Menu) > System Menu
Sending Jobs
[Home] key > [...] > [System Menu] > [Security Settings] > "System Stamp" [Sending Jobs]
Configure stamp settings for sending documents.
After configuring the setting, return to the Sending Functions or Custom Box (Sending Documents) screen from System
Menu, and select the [Reset] key.
Item
Text Stamp Text Stamp
Edit Text
Position
Font
Select whether to print a text stamp on all sending jobs.
Value: Off, On
NOTE
When [On] is selected, the Text Stamp settings cannot be changed when
sending.
Select a text string to be stamped from templates, or enter a maximum of
32 characters for the text string.
NOTE
Templates that have been set will appear. For details on registering templates,
refer to the following:
Text (Text Stamp) (page 8-32)
Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle, Bottom Right
NOTE
Specify the detailed stamp position using numeric values, and to set the stamp
angle.
Set the font of the text stamp.
Value
Font: Courier, Letter Gothic
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font Size (Text Stamp) (page 8-32)
Character Border: Off, Circle, Rectangle, Underline
Color: Black, Cyan, Magenta, Yellow, Red, Green, Blue, White
Style: None, Bold, Italic, Bold/Italic
Display Pattern: Transparent, Clipping, Overwrite
Density: 10 to 100% (in 10% increments)
8-78
Description