Kyocera 3508ci Operation Manual page 308

Using Various Functions > Functions
*1 Paper size automatically detected in the cassette.
*2 Paper size automatically detected in the Multipurpose Tray.
*3 For instructions on how to specify the custom paper size, refer to the following:
Custom Paper Settings (page 8-15)
*4 The input units can be changed in System Menu. For details, refer to the following:
Measurement (page 8-6)
*5 To print on preprinted or prepunched paper or on letterhead, refer to the following:
Special Paper Action (page 8-18)
*6 For instructions on how to specify the custom paper types 1 to 8, refer to the following:
Media Type Setting (page 8-16)
NOTE
• You can conveniently select in advance the size and type of paper that will be used often and set them as default.
MP Tray Settings (page 8-14)
• If the specified size of paper is not loaded in the paper source cassette or multipurpose tray, a confirmation screen
appears. Load the required paper in the multipurpose tray and select [Continue] to start copying.
6-22