Kyocera 3508ci Operation Manual page 420

Setup and Registration (System Menu) > System Menu
Toner Settings
[Home] key > [...] > [System Menu] > [Device Settings] > [Toner Settings]
Item
Color Toner Empty Action
Low Toner Alert
Toner Waste Full Alert
Notify via Operation
Panel
Notify Externally (for
admin. use)
Select whether printing is prohibited or the Print in Black and White setting is used for
printing once the color toner runs out.
Value: Stop printing, Print in Black & White
NOTE
This setting is not valid when the optional Fiery Controller is installed.
Set the amount of remaining toner to notify the administrator when to order a toner
when the toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
NOTE
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to
100% (in 1% increments).
Notifies the user or the administrator when the waste toner box is almost full. Set the
notification timer based on the amount of toner in the waste toner box.
Notifies you via the Operation Panel when the waste toner box is almost full.
Value: Off, On
NOTE
If [On] is selected, set the notification timer based on the amount of toner in the waste
toner box. The setting range is 10 to 90% (in 10% increments).
Notifies the administrator when the waste toner box is almost full. This notification is
used for the Event Report, Status Monitor, SNMP Trap (Printer Management System
etc.).
Value: Off, On
NOTE
If [On] is selected, set the notification timer based on the amount of toner in the waste
toner box. The setting range is 10 to 90% (in 10% increments).
8-23
Description