Image Repeat - Kyocera 3508ci Operation Manual

Using Various Functions > Functions

Image Repeat

Layout/Edit
Copy
Tiles the 1 copied sheet with an original image. You can also specify the area of the original to repeat.
Zoom Priority
Original
Double Copy
Original
Item
Off
Zoom 25 to 400% (in 1% increments)
Priority
Specify
Repeat
Area
Double Copy
*1 The input units can be changed in System Menu.
Measurement (page 8-6)
Repeat an image of specified zoom ratio.
Copy
Copy two image.
Copy
Value
Off
On
*1
Start Metric
X1: 0 to 431 mm
Y1: 0 to 296 mm
Inch
X1: 0.00 to 16.99"
Y1: 0.00 to 11.68"
*1
Area Metric
X2: 1 to 432 mm
Y2: 1 to 297 mm
Inch
X2: 0.01 to 17.00"
Y2: 0.01 to 11.69"
―
Set the default screen.
Use [+], [-] or the numeric keys to change the displayed
magnification as desired.
To set the area of the original to be repeated, select [Next >].
To set the area of the original to be repeated, select [On] for
"Specify Repeat Area".
Use [+], [-] or the numeric keys to input the area of the original
to be repeated.
Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A5 original onto an A4
sheet which you then cut in half to make 2 copies that are
identical to the original.
6-69
Description
Y1: Length from top left of
platen to top edge of repeat
area
X1: Length from top left of
platen to left edge of repeat
area
Y2: Height of repeat area
X2: Width of repeat area