Setting User Login Administration; Authentication Security - Kyocera 3508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Setting User Login Administration

This registers, alters and deletes users and configures the settings for User Login Administration.

Authentication Security

If user authentication is enabled, configure the user authentication settings.
User Account Lockout Setting
You can prohibit the use of a user account if an incorrect password is entered repeatedly to login with that account.
1
2
Display the screen.
[Home] key > [...] > [System Menu] > [Job Accounting/Authentication] > "Authentication
Security" [User Account Lockout Settings]
NOTE
If the login user name entry screen appears during operations, enter a login user name and
password, and select [Login]. For this, you need to login as an administrator or as a user with
privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Login User Name: 2508ci: 2500, 3508ci: 3500
Login Password: 2508ci: 2500, 3508ci: 3500
Configure the settings.
The following settings can be selected.
Item
Lockout
Lockout Policy
Locked out Users
List
Select whether or not account lockout policy is enabled.
Value: Off, On
Specify the conditions and the extent to which the account lockout
is applied.
Value
Number of Retries until Locked:
Specify how many login retries are allowed
until the account is locked out.
(1 to 10 times)
Lockout Duration:Specify how long the account is to be
locked out until it is unlocked.
(1 to 60 minutes)
Lockout Target: Specify the extent to which the account
lockout is applied. You can select from [All]
or [Remote Login Only]. Remote Login Only
locks out all operations from outside the
operation panel.
Displays a list of locked out users. You can unlock a user by
selecting the user in the list, and selecting [Unlock].
NOTE
This function is displayed when account lockout policy is enabled.
9-4
Descriptions