Server Settings - Kyocera 3508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Server Settings

Set the server type when network authentication is enabled.
1
2
Display the screen.
1
[Home] key > [...] > [System Menu] > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Login User Name: 2508ci: 2500, 3508ci: 3500
Login Password: 2508ci: 2500, 3508ci: 3500
2
Select "User Login Setting" [User Login] > [Network Authentication]
Configure the settings.
1
Select [NTLM], [Kerberos] or [Ext.] as the server type and enter the host name (256
characters or less) for the Authentication Server.
When selecting [Ext.] as the server type, enter the port number.
NOTE
• Selecting [Add/Edit/Delete Domain] displays the domain registration list. In the
domain registration list screen, select [Add/Edit], and enter the domain name. Up to
10 domain names can be registered.
• If two or more domains are registered, select [Default Domain] and select the default
domain.
2
Select [OK].
NOTE
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
9-17