Kyocera 3508ci Operation Manual page 456

Setup and Registration (System Menu) > System Menu
Others
Item
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Protocol Settings
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Protocol Settings]
Configure protocol settings.
Item
SMTP (Email TX)
POP3 (Email RX)
FTP Client (Transmission)
FTP Server Protocol
(Reception) Settings
Available
Network
SMB Client (Transmission)
NetBEUI Protocol
Settings
Available
Network
WSD Scan
WSD Print
iFax
DSM Scan
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full,
1000BASE-T
Email Settings (page 8-39)
POP3 (page 8-39)
FTP Settings (page 8-39)
Select whether to receive documents using FTP.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
SMB Settings (page 8-39)
Selects whether to receive documents using NetBEUI.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
WSD Scan (page 8-40)
WSD Print (page 8-40)
Select whether to use i-FAX.
Value: Off, On
NOTE
This function is displayed when the optional Internet FAX Kit is activated.
DSM Scan (page 8-40)
Description
Description
8-59
*1
*1