Activating Applications - Kyocera 3508ci Operation Manual

Operation on the Machine > Application

Activating Applications

1
2
4
Select [Yes].
Installation of the application begins. Depending on the application being installed, the
installation may take some time.
Once the installation ends, the original screen reappears.
NOTE
• To install another application, repeat steps 2-3 and 2-4.
• To remove the USB drive, select [Remove USB] and wait until the message "USB
Drive can be safely removed." appears. Then remove the USB drive.
Display the screen.
[Home] key > [...] > [System Menu] > [Add/Delete Application] > "Application" [Add/Delete
Application]
NOTE
If the user authentication screen appears, enter your login user name and login password
and select [Login]. For this, you need to login as an administrator or as a user with
privileges to carry out this setting. The factory default login user name and login password
are set as shown below.
Login User Name: 2508ci: 2500, 3508ci: 3500
Login Password: 2508ci: 2500, 3508ci: 3500
Activate the application.
1
Select the desired application > [Activate]
You can view detailed information on the selected application by selecting [
icon).
2
Enter the license key > [Official]
Some applications do not require you to enter a license key. If the license key entry screen
does not appear, go to step 2-3. To use the application as a trial, select [Trial] without
entering the license key.
3
Select [Yes].
IMPORTANT
• If you change the date/time while using the trial version of an application, you
will no longer be able to use the application.
• Icons of activated application are displayed in the Home screen.
4
Select the application icon in the Home screen.
Select the application icon.
The application will start up.
5-15
] (information