Kyocera 3508ci Operation Manual page 177

Preparation before Use > Registering Destinations in the Address Book
• To directly specify the SMB folder, enter the "Host name," "Port," "Folder Path," "Login User
Name" and "Login Password."
NOTE
For the computer name, share name, domain name, and user name, enter the
information that you noted when you created the shared folder. For details on creating
shared folders, refer to the following:
Preparation for Sending a Document to a Shared Folder in a PC (page 3-22)
The table below explains the items to be entered.
Item
*1
Host Name
Port
Folder Path
*2
Login User Name
Login Password
*1 "Host name" or "IP address"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10])
*2 When sending a document through an optional network interface (IB-50 or IB-51), "\"
cannot be used. If the computer name is different from the domain name, login user
name needs to be input by using "@."
(Example: james.smith@abcdnet)
Computer name
Port number
If the port number is not specified, the default port number is 445.
Share name
For example: scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
• If the computer name and domain name are the same:
User Name
For example: james.smith
• If the computer name and domain name are different:
Domain name\User name
For example: abcdnet\james.smith
Windows logon password
(Case sensitive.)
3-38
Description