Editing An Account - Kyocera 3508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Job Accounting (Local)
IMPORTANT
Select [Off], [Use Port 1 Only] or [Use Port 2 Only] as the "Fax Port Restriction" setting.
Applying Restriction
Restriction can be applied in the following modes:
Item
Off
Counter Limit
Reject Usage

Editing an Account

1
2
No restriction is applied.
Restricts the print counter in one-page increments up to 9,999,999 copies.
Restriction is applied.
Display the screen.
1
[Home] key > [...] > [System Menu] > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Login User Name: 2508ci: 2500, 3508ci: 3500
Login Password: 2508ci: 2500, 3508ci: 3500
2
Select "Job Accounting Setting" [Add/Edit Job Accounting].
Edit an account.
1
Select [ ] (information icon) for the account name you wish to edit.
NOTE
• Search by account ID or account name. Select either [Search (ID)] or [Search
(Name)] to switch between [Search (ID)] and [Search (Name)].
• Select [Account Name] or [ Account ID] to sort the account list.
2
Change the account information.
3
Select [Save].
The account information is changed.
Descriptions
9-37