Kyocera 3508ci Operation Manual page 340

Using Various Functions > Functions
NOTE
• [Full Scan] is not displayed when copying.
• The default setting for border erase width can be changed.
Border Erase Default (page 8-32)
• The default width for back page can be changed.
Border Erase to Back Page (page 8-32)
Item
Standard
*1
Full Scan
Border Erase Border
Sheet
Back Page
Border Erase Border
Book
Back Page
Individual Border
Border Erase
Back Page
Original
Orientation
*1 Not displayed when copying.
*2 The input units can be changed in System Menu.
Measurement (page 8-6)
*3 This function can only be used when the optional OCR Scan Activation Kit is installed.
Value
Scan originals with Standard Mode.
Scan originals without white margins.
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page,
Do Not Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page,
Do Not Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page,
Do Not Erase
Top Edge on Top, Top
*3
Edge on Left, Auto
6-54
Description
Set the border erase width.
Use [+], [-] or the numeric keys to set the value.
For 2-sided originals, select [Back Page] and then
select [Same as Front Page] or [Do Not Erase].
Set the border erase width around the edges and in
*2
the center of the book.
Use [+], [-] or the numeric keys to set the value.
For 2-sided originals, select [Back Page] and then
select [Same as Front Page] or [Do Not Erase].
Set the border erase width individually for all
*2
edges.
Use [+], [-] or the numeric keys to set the value.
For 2-sided originals, select [Back Page] and then
select [Same as Front Page] or [Do Not Erase].
Select the orientation of the original document top
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the originals,
either [Top Edge on Top] or [Top Edge on Left].
*2