Multiple Eventlites (Wireless Dmx Control) - SHOWTEC EventLITE 4/10 Q4 Set 6x Manual

Hide thumbs Also See for EventLITE 4/10 Q4 Set 6x:

Table of Contents

EventLITE 4/10 Q4 Set 6x

Multiple EventLITEs (Wireless DMX Control)

01) Install multiple EventLITEs at the desired positions (maximum Wi-Fi distance: 250 m).

02) Make sure the EventLITEs are in "slave" mode.

03) In order for the EventLITEs to receive a wireless DMX signal properly, in main menu, press the

UP/DOWN buttons to select 1: DMX and press the ENTER button to enter the submenu.

04) Unlock W-DMX on all EventLITEs (see page 24 for more information).

05) Pair the wireless signal transmitter with multiple EventLITEs. In order to create a wireless connection,

please read the manual of your wireless signal transmitter.

06) When the blue W-DMX LED indicator (13) is blinking, the device is searching for a connection.

07) Once a connection has been established, the LED indicator (13) will light up blue.

08) Use a DMX cable to connect the transmitter to a suitable light controller.

Multiple EventLITEs Wireless DMX Control

Ordercode: 44061

Fig. 09

Table of Contents

Do you have a question about the EventLITE 4/10 Q4 Set 6x and is the answer not in the manual?