Date And Time; Language; More Settings; Hdmi Cec - Strong SRT 2402 User Manual

Hybrid uhd android receiver
Hide thumbs Also See for SRT 2402:
Table of Contents

Advertisement

NOTE:
WARNING:

6.8 Date and Time

In this menu you will be able to change the date and time settings of the box

6.9 Language

Select the OSD language which shall be used for the menus on screen.

7.0 MORE SETTINGS

In this menu you can set up, modify and change many settings of the Android part like you are used
to from your tablet or smartphone. All basic functions can be modified as {Wi-Fi, Bluetooth, Ethernet,
Sounds, Display, Storage, Permissions} and {Managing installed apps}.

7.1 HDMI CEC

CEC (Consumer Electronics Control) can be used for controlling your equipment with only 1 remote
control.
Set One key play to ON to use all connected CEC supported equipment that shall be switched ON when
SRT 2402 is switched ON by the remote control.*
Set One key power off to ON to use all connected CEC supported equipment that shall be switched OFF
when SRT 2402 is switched OFF by the remote control.*
* CEC supported equipment is NOT always compatible with each other.

7.2 Add accessory (Bluetooth)

This menu allows you to open the Bluetooth search detection {ON} or {OFF}, to setup new connections to
other Bluetooth devices.
If you like to make a connection, you need to open this function on both devices. With a confirmation by
numeric key you make a secured connection.

7.3 DTV Settings

The DTV settings menu allows you to configure AV Settings, Language audio/subtitles, OSD Settings,
Parental Control, Database, Recording Settings, System info and reset as you wish.
The Tuner settings allow you to make a main selection if you would like to either use an antenna or
cable. As this receiver has only a single ANT IN connector you have to select whether you want to receive
terrestrial or cable signals.
Upgrades reset the Android IP Box back to the factory settings. Make
sure that you make a backup of the apps, or note the apps you have
downloaded before.
During the upgrade and flash process, do not switch off the main power!
Wait until the Android IP Box reboots and restarts automatically.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents