Electrical Connection; Hose Connections - ADVANCED UV LIGHT ICON Owner's Manual

Electrical connection

CAUTION!
Risk of electric shock!
Only certified electricians according to EN 60204-1/VDE 0113 and current
EVU-standards are allowed to perform the electrical connection. For non-
EU units: Applicable local standards and regulations for the performance of
electrical connections apply.

Hose connections

Survey of electric ballast tray:
1 Terminal for control and sensor connections
2 Mains supply
3 Strain relief for mains supply
 Connect the mains supply cable.
 Fasten the strain relief.
 Connect the control device as described in the chapter Assignment of
terminals.
 Connect the ballast tray terminals.
 Connect the remaining plugs from top canopy and sunbed to the
ballasts on the electric ballast tray. See also the chapter Assignment of
terminals.
 Connect the control cable from the display to the main control board
(display terminal on main PCB).
The following components are optional and are only provided on customer
request:
■ SunHaze system
■ SunFresh system
 Connection of SunHaze system
- Connect the supply hose (orange) of the SunHaze system.
- Push in the blue ring at the connection and hold.
- Push in the hose until you reach the stop position.
- Let the blue ring go.
- Check the hose for tight fit.
32