Assembly Of Bench Supports; Installation Of Groundplate; Installation Of Ac Unit - ADVANCED UV LIGHT ICON Owner's Manual

NOTICE:

Fasten screws only hand-tight so that bench supports can
still be adjusted when installing the groundplate.

Installation of groundplate

ATTENTION!
Watch for correct position of bench supports and rear column.
Watch carefully for correct position of bench supports and rear column.
Supports and rear column must stand in a right angle position.
Installation of AC system

Assembly of bench supports

In order to put the unit into a level position and to compensate for slight
irregularities in the floor, the adjustment screws must be mounted to the
bench supports.
 Take adjustment screws out of the box with accessories and screw at
the front and rear side into the bench supports.
 Fasten bench supports to the rear column.
 Move the groundplate between the bench supports and hang it into the
bench supports. If necessary, correct position of bench supports.
 Fasten fixing screws for bench supports tight.
The AC system consists of the following components:
- AC unit
- drip pan for condensation water
- condensation water pump
- container for condensation water
 Position the cold air exit of the AC unit above the connecting air manifold
of the unit.
 Push the AC unit to the rear holding bracket up to the stop position.
27