Malfunction During Operation - ADVANCED UV LIGHT ICON Owner's Manual

Malfunctions during operation
Malfunction
Equipment does not
start when control
device is activated.
UV-lamps are flickering.
Equipment gets too hot.
One or more UV lamps
in the top canopy or
sunbed do not light up.
One or more HID lamps
do not light up.
83
Possible cause and correction
No supply voltage.
Check fusage and FI-protection switch.
Starter defective.
Replace starter.
Ventilation in the room (fresh air supply
and/exhaust air disposal) is not sufficient.
Cehck air openings and if necessary
remove blockage.
UV-lamps not correctly installed into the
lapholders.
Check installation of UV-lamps.
UV-lamp defective.
Replace UV -lamp.
HID lamp defective.
Replace HID lamp.
Igntor for HID lamp defective.
Replace ignitor.