ADVANCED UV LIGHT ICON Owner's Manual page 71

 Push the sunbed acrylic backwards into the rear plate. This gives you
enough tolerance space to lower the sunbed acrylic into the front profile.
 At the front headend side, push the sunbed acrylic down.
- Keep the sunbed acrylic in this position.
 Close the sash lock at the headend side:
Turn counter clockwise by 90°.
– The sash lock pushes the sunbed acrylic into the front groove.
 At the footend , close to the microswitch, push down the sunbed acrylic.
 Close the sash lock at the footend side:
Turn counter clockwise by 90°.
– The sash lock pushes the sunbed acrylic into front groove.
60