Replacement Of Backlighting Top Canopy - ADVANCED UV LIGHT ICON Owner's Manual

Replacing of backlighting lamps in the top canopy
Se the new starter into the holder (1).
 Push the new starter clockwise for about 90° (2).
 If necessary, clean the backlighting lamp with a soft leather cloth.
 Put the backlighting lamp into the lampholder (3).
 Turn the backlighting lamp for about 90° counter clockwise (4).
The backlighting lamp snaps into the lampholder. Take care that the
stamp on the backlighting lamp point into the direction of the viewer.
 Reassemble the front cover.
 Put the brackets into the slots at the bench supports.
 Push the front cover against the sunbed bench and tighten with screws.
The top canopy contains a backlighting lamp which highlights the acrylic
insert in the top canopy.
To replace the backlighting lamp and/or the starter, proceed as follows:
 Disconnect the unit from the mains supply with the mains disconnection
switchand secure with lock and key against reconnection.
 Pull out the holding bolt .
 Lift the top canopy cover and support it.
70