Assembly Of Rear Column Acrylic - ADVANCED UV LIGHT ICON Owner's Manual

Assembly of rear column acrylic

 Turn the front top canopy profile inwards until the spring locks in.
At the bottom, the rear column acrylic sits in a groove. At the top, a profile
strip keeps the rear column acrylic in place. The profile strip is fixed with
quick connections to the rear column.
 Loosen the quick connections at the profile strip. Remove profile strip.
 Connect the control panel.
The supply cable for the control panel must be fed through the small drill
hole in the acrylic to the connection plug.
- Lift the rear column acrylic onto the sunbed bench.
- Let the acrylic rest on the front side.
- Push the plugthrough the small opening at the rear side of
the rear column acrylic. (1.).
- Push the plug into the terminal (2.).
 If necessary, clean the control panel with a dry, clean cloth.
38