Installation Of Uv Lamps Into The Top Canopy; Removing Uv Lamps Out Of The Sunbed - ADVANCED UV LIGHT ICON Owner's Manual

Table of Contents

Advertisement

CAUTION! RISK OF DAMAGE TO THE ENVIRONMENT
Never dispose of of UV-lamps with regular waste. Dispose of UV-lamps in
complianece with applicable environmental standards and regulations.
Installation of UV-lamps into top canopy
Disassembly of UV lamps out of sunbed
 Clean the UV lamps with a soft leather cloth slightly damped with glass
cleaner or clean water.
 Put the UV-lamp into the holder (3).
 Turn the UV-lamp by 90° clockwise (4) and make sure that the stamp on
the UV lamp is clearly visible to the viewer.
 Tilt the top canopy acrylic upwards until you can hear it click into the top.
 If you want to replace a UV-lamp in the sunbed, proceed as follows:
 Disconnect the mains disconnection switch and secure with lock and
key against accidental activation reconnection.
 Tilt the sunbed acrylic upward (1).
 Lift the acrylic support and turn to the headend until it clicks in(2).
56

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICON and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents