Annual Inspection Or Every 1000 Hours Of Operation; Replacement Of Uv Lamps; Removing Uv Lamps Out Of The Top Canopy - ADVANCED UV LIGHT ICON Owner's Manual

Annual inspection or every 1,000 operating hours

Replacement of UV lamps

NOTICE:
Advanced UV Light recommends to replace lamp starters

with every second lamp change when conventional (non
electronic) starter type is used.
Disassembly of UV lamps out of top canopy
Once a year or every 1,000 operating hours, whichever comes first, the
unit needs to be inspected for electrical and mechanical safety. The annual
inspecton must be performed by service personnel of Advanced UV Light
or service personnel of authorized distrbutors. For authorized service
network see Contact Manufacturer.
The UV lamps must be replaced whenever useful lifetime as recommended
by manufacturer has expired or whenever a UV-lamps fails or is defective.
 In order to loosen the screws at the cover profile, take a screwdriver, push
into direction indicated by the arrow (1.) and keep pushed.
 Then turn the screw into direction as indicated by the arrow(2.).
 Take out the cover profile.
 Turn the first UV-lamp counter clockwise 90° (1).
 Take the UV-lamp out of the holder (2).
 Follow the same procedure for the remaining UV-lamps.
55