Assembly Of Cover Strip; Replacement Of Dust Filters; Dust Filter Top Canopy - ADVANCED UV LIGHT ICON Owner's Manual

Assembly of cover profile
Replacement of dust filter mats
CAUTION! Risk of damage to the environment!
Dispose of dust filter mats in compliance with applicable environmental
standards and regulations.
Dust filter mats top canopy
 Take the cover profile and fit it into position at the place of assembly (1).
 Fasten the cover profile with the quick connections. (2) (3)
 Assemble the top canopy acrylic as described in the chapter
Replacement of top canopy acrylic..
 Assembly the rear column acrylic as described in the chapter,
Assembly of rear column acrylic
The dust filter mats must be cleaned every 50 hours or earlier depending
ambient conditions.
After 500 hours the dust filter mats need to be replaced, or earlier pending
ambient conditions .
At the top canopy, there are two dust filter mats between the two front top
profile grooves.
67