Connect the emergency stop button.
-
Take the cable end with the two receptables out of the shaft
in the sunbed bench.
-
Put the receptables onto the plugs at the emergency stop
button. The sequence is arbitrary.
Lower the cover on the left side and push it into the rear plate.
-
Let the cover down onto the loudspeakers.
-
If necessary, slightly adjust the cover moving it right and left
or back and forth.
Fasten the cover from below.
Assemble the cover at the footend side.
-
Take the cover and position yourself at the footend.
Lower the cover at the right hand side and push it into the rear plate.
-
Let the cover down onto the sunbed bench.
-
If necessary, slightly adjust the cover moving it right and left
or back and forth.
Fasten the cover from below.
35
Need help?
Do you have a question about the ICON and is the answer not in the manual?