ADVANCED UV LIGHT ICON Owner's Manual page 82

 Turn the backlighting lamp for abot 90° clockwise (1).
 Take the lamp out of lampholder (2).
 To replace the starter, turn starter for about 90° counter clockwise. (3).
 Remove the starter (4).
 Put the new starter into the holder (1).
 Turn the new starter clockwise for about 90° (2).
 If necessary, clean the backlighting lamp with a clean, soft leather cloth
damped with glass cleaner or clean water.
 Put the backlighting lamp into the lampholder (3).
 Turn the backlighting lamp for about 90° counter clockwise (4).
– The backlighting lamp snaps into the holder. Make sure that the stamp
on the lamp points to the viewer.
 Remove the top canopy support.
 Push the top canopy cover into the front profile groove. Keep top canopy
cover in this position.
 Push holding bolts into position again.
71